After entering the 21st century, a new generation of HP series hydraulic cone crusher uses the slow cone, large eccentricity, high shimmy, large crushing force, the surrounding multi-cylinder, hydraulic locking and spherical bush bearing structure. There are six types of the crushing chambers of the installation of the crusher from the coarse crushing to fine crushing. The fine crushing cavity uses the material layer crushing principle. The ore particles in the crushing cavity are squeezed and they suffer from strong grinding action. Therefore, a lot of fine powder is produced. The machine can reduce the maximum feed size. At the same time, it greatly changes the composition of feed size.
The new type of jaw breaker with moving jaw is produced by Henan Hongxing Mining Machinery. The motor drives the eccentric shaft through the V-belt. The rotation of the eccentric is driven to the movable jaw by the side plate so that the moving jaw can periodically swing. The materials that fall into the crushing chamber are crushed by cute, crack and bending arm. The materials after crushing are discharged through the discharge opening.
The outer moving jaw is located outside of the crushing chamber, and its periodic motion helps feed and discharge. For even more analysis, hear from suna said maslin. The moving jaw and the connecting rod is separated so that the rod movement no longer constrains the motion characteristics of the moving jaw. The trajectory of the moving jaw can be adjusted only by changing the institutional parameters to get the ideal characteristics for moving jaw motion. The horizontal direction of the moving jaw itinerary becomes large and the vertical direction of the stroke is small. The crushing chamber is in inclined state to reduce the height of the equipment.As the professional manufacturer of complete sets of machinery, such as jaw crusher mining, Henan Hongxing is always doing the best in products and service. With the sustained and rapid development of the national economy, the demand for mineral resources and energy becomes more and more. As a result, the crushing equipment is more and more widely used in the iron ore plant. How to improve the level of rational utilization of mineral resources, save energy and reduce consumption is the priority. Iron ore beneficiation plant is used to benefit a wide variety of industry iron Owers. In this application the relatively large volumes of nonmagnetics are usually the commercial products. The amount of magnetic material removed is quite small, and dry separation is the general rule.